SAA-V2 Vector Network Analyzer 10KHz~3GHz HF VHF UHF Antenna Analyzer 3.2" inch

Description

NEW UPGRADE FNCTION : Own our Seesii 3GHz Vector Network Analyzer,you can test the standing wave impedance of the antenna, you can also debug the duplexer, the insertion loss of the filter, the isolation, the standing wave, you can also test the attenuation of the cable, shorten the coefficient, the phase, you can also test the amplification of the antenna amplifier
POWERFUL FREQUENCY METER: The improved frequency measurement can measure the antenna frequency of 2.4G up to to 3G. 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: 50dB(50KHz-1.5GHz), 40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
IMPROVED ACCURACY: NanoVNA SAA-V2 Vector Antenna analyzer equipped with the upgraded shell,Strong anti-interference, improve accuracy.with 3.2 inch touch screen and touchscreen pen,make more accurate and easy to operate.
POWERFUL SECURE POWER SUPPLY: This SAA-V2 is battery powered or USB powered; Built in 2000mAh battery, could work for about 3 hours continuously, if need extra working time, it can be connected to power bank or power source.
COMPATIBLE :The 3GHz second-generation NanoVNA vector network analyzer is based on OwOComm's S-A-A-2 design, and its performance is greatly upgraded.Can be control by PC,computer software compatible with Linux, Windows (7+)
SEESII Newest Version Vector Network Analyzer With Metal Case
Measuring frequency range: 10kHz-3GHz
System dynamic range (after calibration): 70dB (50k to 1.5GHz); 60dB (to 3GHz)
S11 noise floor (after calibration): -50dB (to 1.5GHz); -40dB (to 3GHz)
Scan rate: 100 points/second
Number of scanning points (on device screen): adjustable, maximum 201 points
Number of calibration points (maximum number of USB scanning points): 1024 points (when connected to a computer and using a host computer)
Power supply: USB, 400mA RF port: SMA (not RP-SMA)
USB interface: Micro USB
Display screen: 3.2 inch TFT (320 x 480)
Battery: 2000 mAh 3.6V/3.7V lithium battery, 6*40*60 mm (maximum size)
Net weight: 320g
Port 2 return loss: >= 13dB (to 3GHz), 20dB (to 1.5GHz)
Display tracking: 4, mark: 4, save settings: 5
Computer software compatible: Linux, Windows (7+)
S-A-A-2 Upgraded Version
The 3GHz second-generation NanoVNA vector network analyzer is based on OwOComm's S-A-A-2 design, and its performance is greatly upgraded.
Compared with the basic version S-A-A-2, SAA-V2 has designed a metal case, and the screen size has been increased from 2.8 inches to 3.2 inches, and a touch screen pen has been added to make your operation more convenient, while adding the function of measuring the duplexer and the filter