Mechanical Car Door Installer Remover Jack Lift Hoist Auto Body Paint Door

Description

Mechanical Car Door Installer Remover Jack Lift Hoist Auto Body Paint Door
Assembly:
Mechanical Car Door Installer Remover Jack Lift Hoist Auto Body Paint Door
Mechanical Car Door Installer Remover Jack Lift Hoist Auto Body Paint Door
Assembly:
1. Attach main posts (#6) to cross bar (#20) with bolt (#12). flat washer (#9) and nut (#11). Tighten the bolts.
2. Attach casters ( #10) to cross bar ( #20) with nut ( #8). Tighen the bolts .
3. Insert lifting post (#19) between main posts (#6) and connect main posts with plates A(#18) and B(#25) with bolts (#22), flat washers (#3) and nuts (#23). Tighten the bolts.
4. Assemble the bottle jack #7) on the main posts #6) with bolts #15), flat washers #14) and nuts (#13). Tighten the bolts.
5. Insert adjustable top har (#1) into main post #6) with adjustable knob #) and tighten it.
6.  Install position fixed rods ( #4) between the justable top bar ( #1) with flat washer ( #9), large flat washer ( #26) and butterfly nuts ( #2).
7. Fix the support frame ( #16) on the lifting post ( #19) by bolts (#12), flat washer ( #9) and nut (#11). Tighten the bolts.
Product Details:
Now one tech can handle big bumpers and doors alone
Ample padding, no metal-on-metal contact, no damage
Industry’s only 8” front-to-back tilting adjustment
Side-to-side tilt adjustment for easier part removal & installation
Wide stance for added stability
Maximum Load: 200kg
Min. Lift Height: 195mm
Max. Lift Height: 365mm
Heavy gauge steel construction
Powder coat finish
Packing Size:29.13"-24.21"-6.50"
Packing weight: 50.95 lbs.
Hydraulic for Easy Raising and Lowering
Rubber Coated Jack Feet for Secure Placement
Mechanical Car Door Installer Remover Jack Lift Hoist Auto Body Paint Door
Mechanical Car Door Installer Remover Jack Lift Hoist Auto Body Paint Door
Assembly:
1. Attach main posts (#6) to cross bar (#20) with bolt (#12). flat washer (#9) and nut (#11). Tighten the bolts.
2. Attach casters ( #10) to cross bar ( #20) with nut ( #8). Tighen the bolts .
3. Insert lifting post (#19) between main posts (#6) and connect main posts with plates A(#18) and B(#25) with bolts (#22), flat washers (#3) and nuts (#23). Tighten the bolts.
4. Assemble the bottle jack #7) on the main posts #6) with bolts #15), flat washers #14) and nuts (#13). Tighten the bolts.
5. Insert adjustable top har (#1) into main post #6) with adjustable knob #) and tighten it.
6.  Install position fixed rods ( #4) between the justable top bar ( #1) with flat washer ( #9), large flat washer ( #26) and butterfly nuts ( #2).
7. Fix the support frame ( #16) on the lifting post ( #19) by bolts (#12), flat washer ( #9) and nut (#11). Tighten the bolts.
Product Details:
Now one tech can handle big bumpers and doors alone
Ample padding, no metal-on-metal contact, no damage
Industry’s only 8” front-to-back tilting adjustment
Side-to-side tilt adjustment for easier part removal & installation
Wide stance for added stability
Maximum Load: 200kg
Min. Lift Height: 195mm
Max. Lift Height: 365mm
Heavy gauge steel construction
Powder coat finish
Packing Size:29.13"-24.21"-6.50"
Packing weight: 50.95 lbs.
Hydraulic for Easy Raising and Lowering
Rubber Coated Jack Feet for Secure Placement
Item Specifics
Brand
SCITOO
Manufacturer Part Number
CN16024903S
Condition
New
Warranty
1 Year
Color
Red
Ship from
Ontario, California
Ship to
CA
Weight
23.11KG
Min. Lift Height
195mm
Drive
Hydraulic
Suitable for
Vehicle/Car
Material
Steel
Capacity
Door Jack
Max. Lift Height
365mm
Set or Single Item
Single Item
Shipping
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
]
Payment
[
We only accept payment through PayPal. You can open a Paypal account at
]
Returns
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
]
Customer Services
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
]
Feedback
1. We will leave a feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
New List Item
Psaaenger and Driver Sun Visor For 1997-2004 Chevrolet Corvette
USD 80.99
New Door Lock Actuator Front Driver for BMW 740Ld 740Li ActiveHybrid 51217185689
USD 81.39
SCITOO 3Pcs Steering Rack 26-9008 For Volkswagen Beetle Volkswagen Golf 1998-10
USD 195.00
RH Side Mirror Fits For 2002-2005 Ford EXPLORER Black Power Puddle LAMP
USD 38.07
A/C Heater Blower Motor Fan For GMC Sonoma 2004-1994/Chevrolet Front ABS Plastic
USD 38.58
Shop Category
Store Home
UTV & ATV Brake System Parts
▷  Brake pads
♢  Sintered Brake Pads
♢  Kevlar Carbon Brake Pads
◈  Brake shoes
Auto parts
◈  Towing Mirrors
◈  Ignition Coil
◈  Coilover
◈  Lift Support
◈  Wheel Spacers
◈  Key Case
◈  Struts/Absorbers Shocks
◈  Fuel Pump Assembly
◈  Starter
◈  CV Axle
◈  Trunk Floor Mats
◈  Exterior Light
◈  Blower Motor
◈  complete struts
◈  Fastener
◈  Window Switch
wheel hub bearing
Door handle
Cylinder Head Gasket Sets
suspension kit
◈  Suspension Kits
◈  suspension cj
◈  suspension gxy
◈  suspension fu
AC Compressor
Brake Pads & Rotors
◈  Brake Rotors
◈  Brake Pads
◈  Brake Rotors and Pads
◈  Brake Pad Sensor
◈  Brake Drum
◈  Brake Shoe
Air suspensions
Car Seat Cover
leveling lift kit
Nerf Bars & Running Boards
Alternators
Cylinder Piston Gasket Kit
Wheel lug nut
Window Regulator
ball joint
Fuel Injectors
Car Cover
Car Tools
Thermostat Housing
Radiator Coolant Tank
Windshield Wiper Motor
Door Lock Actuator
Power Steering Pump
Variable Timing Solenoid (VVT)
Electric Water Pump
Valve Cover
Fuel Tank Pipe
Oil Pump
Timing Chain Kits
Timing Belt Kits
Water Pumps
Strut Tie Bar
Throttle Body
Harmonic Balancer
Oil Pan
Oxygen Sensors
AC Condenser & Radiator
◈  AC Condenser
◈  Radiator
◈  AC Condenser & Radiator
Mass Air Flow Sensor
Motorcycle Carburetor & Parts
Urea Pump
Cooling Fan Clutch
Cooling Fan
Hydraulic Lifter&Roller Lifter
Suspension+Strut+Bearing
Starter Relay Solenoid
Regulator Rectifier
HVAC
Towing&Hauling
ATV Rear Wheel Axle
Parking sensor
Car Antenna
ABS Wheel Speed Sensor
PTO Clutch
Vacuum Pump
Tensioners
Spoilers & Wings
Oil Cooler
Purge Valve
Knock Sensor
Turbocharger
Crankshaft Position Sensor
Camshaft Position Sensor
MAP Sensor
Oil Pressure Sensor
Throttle Position Sensor
Stator
idle air control valve
Transfer Case Shift Motor
Secondary Air Injection Pump
Running Board Motor
Clutch Slave Cylinder
Wheel Spacers
Consoles & Parts
Roof rack
Bumper
Tire Pressure Gauge
Steering Rack
Wiring Harness
Air Diesel Heater
Spark Plug Ignition Wire
Engine Mount
Glow Plug
Air Cleaner Filter Box
Ignition Distributor
Cylinder Piston Kit
Pressure Tester Gauge
Jack Stands
C Notch & Flip Kit
Wheel Lug
Sun Visor
window visor
trim tilt motor
ATV Brake Caliper
Car Carburetor
Horns & Sirens
Air suspension valves solenoid
Heater Control Valve
Steering U-Joint
Fuel Shut Off Solenoid
Fuel Cell Tank
Driveshaft
Height Level Sensor
Temperature Sensor
Radiator Hose
Release Cable
Ballast module
Rubber Seal Strip
Dipstick
Removal Open Tools
Camshaft & Crankshaft
ATV Brake Master Cylinder
4WD Actuator
Trailer Adapter
Battery Switch
Wheel Hub Bearing Knuckle
Throttle Cable Carb Bracket
Oil Fuel Hose Line
Oil Filter Wrench
suspension 5 BIN
◈  chenjiao
LED headlight Assembly
headlight motorcycle
Foot Rest Pedal
O Ring
water Pump Impeller
Tire Pressure Sensor
License Plate Frame
Fastener
Strut Mount
A/C Expansion Valve
Wheel Stem Air Valve Cap
Splash Guards & Mud Flaps
Rocker Arm
Evaporators
Heater Cores
vehicle speed sensor
RV Water Pump
Fuel Pressure Regulator
Light Bar Mount Bracket
Sensor-8
CV axle+Brake Pads/Rotors
Steering Shaft
transmission filter
transmission kit
Steering Wheel
Steering Wheel Hub
Steering Gear Box
Alternator Bracket Kit
snorkel air intake
CDI BOX
Spindle
Proportioning Valve
Hydraulic Hand Brake
Other Golf Cart Parts
Window Glass Hinge
4 pcs wheel hub bearing
ATV Tires
jumper cable
Brake Line Lock Kit
Fender Flares
Brake Oil Hose
Wheel Hub Centric Rings
dash cover
Front Bumper Lip
primary drive clutch
golf
Boat Jack Plate
AC Compressor Control Valve+A
carburetor intake mainfold
Fuel Valve& Petcocks
Motorcycle Brake Clutch Lever
Car Window Film Tint Tools
Cargo Cover
Lower Kits & Parts
Other Motorcycle Parts
Steering Knuckle
Hub Caps
ATV Ignition Switch
fog lights
winch
Windshields
Jeep Wrangler Headlights
Door Hinge Conversion Kits
Door check stop
Pillar Posts
Windshield Outer Trim
Tonneau Cover
Fuse Holder Box
Power Brake Booster
Radiator Support
Blower Motor & Resistor
Hot Stapler
Wheel Rim
Parking Brake Actuator
Lights
◈  Side/Cab Marker Lights
◈  Third Brake Lights
◈  Instrument Panel Lights
◈  Interior Lights
◈  Exterior Lights
◈  Led Headlights
◈  Special Model Lights
Handlebar Riser
lift support
Other
Hot Item
Fuel Pump for Chevy S10 GMC Sonoma Hombre 4.3L 97-02 for Isuzu Hombre 4.3L 97-20
USD 37.69
12V Universal Fuel Pump Gas Diesel Inline Low Pressure HEP-02A BHEP-02A
USD 10.40
2pc 3157 4114 4157 LED DRL Driving Daytime Running Light Bulbs 12SMD 6000K White
USD 8.95
For Chevrolet Silverado GMC Sierra 1500 4.8L 5.3L 1999-2003 Fuel Pump Module
USD 32.69
Turbo Turbocharger For Chevy Cruze Sonic Trax & Buick Encore 1.4T 55565353 140HP
USD 259.99
Picture
Mechanical Car Door Installer Remover Jack Lift Hoist Auto Body Paint Door
Mechanical Car Door Installer Remover Jack Lift Hoist Auto Body Paint Door
Assembly:
1. Attach main posts (#6) to cross bar (#20) with bolt (#12). flat washer (#9) and nut (#11). Tighten the bolts.
2. Attach casters ( #10) to cross bar ( #20) with nut ( #8). Tighen the bolts .
3. Insert lifting post (#19) between main posts (#6) and connect main posts with plates A(#18) and B(#25) with bolts (#22), flat washers (#3) and nuts (#23). Tighten the bolts.
4. Assemble the bottle jack #7) on the main posts #6) with bolts #15), flat washers #14) and nuts (#13). Tighten the bolts.
5. Insert adjustable top har (#1) into main post #6) with adjustable knob #) and tighten it.
6.  Install position fixed rods ( #4) between the justable top bar ( #1) with flat washer ( #9), large flat washer ( #26) and butterfly nuts ( #2).
7. Fix the support frame ( #16) on the lifting post ( #19) by bolts (#12), flat washer ( #9) and nut (#11). Tighten the bolts.
Product Details:
Now one tech can handle big bumpers and doors alone
Ample padding, no metal-on-metal contact, no damage
Industry’s only 8” front-to-back tilting adjustment
Side-to-side tilt adjustment for easier part removal & installation
Wide stance for added stability
Maximum Load: 200kg
Min. Lift Height: 195mm
Max. Lift Height: 365mm
Heavy gauge steel construction
Powder coat finish
Packing Size:29.13"-24.21"-6.50"
Packing weight: 50.95 lbs.
Hydraulic for Easy Raising and Lowering
Rubber Coated Jack Feet for Secure Placement
Shipping
Payment
Returns
Customer Services
Feedback
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
]
[
We only accept payment through PayPal. You can open a Paypal account at
]
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
]
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
]
1. We will leave a feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
Copyright of CN-Batteries . All rights reserved.