Magnetic Loop Antenna, for the AM Band, Oak & Brass, Folds & Rotates, Litz

Description

A beautifully hand crafted magnetic loop antenna for the AM broadcast band. Made from oil stained red oak and brass with solid brass inlays. This antenna is directional so you can rotate it to capture the strongest signal, but you don’t have to rotate the entire antenna because the loop rotates 200 degrees independent of the base. It also folds into itself for transportation or storage. Adjusting the fold position will affect the tuning range of the antenna.
See it in action here on YouTube:
https://youtu.be/P4l6PbQUGEA
The transfer loop seen in the video is optional and
not included
in this auction.
For build and detail pix: Copy and paste the following link into your browser,
then remove the extra "w" from the "wwww" to make it www.
wwww.milspecdesigns.com/radioflakes
You can connect the output directly to your radio, or build your own custom transfer loop. This requires knowledge of radio electronics.
FEATURES:
Primary& secondary loops are wound with 250/46 litz wire.
Primary Inductance: 225uH
Secondary Inductance: 12uH
Height& width when folded: 25-1/4” x 6-1/4” x 6-1/4”
Height& width when unfolded: 32-1/4” x 23-1/4”
Weight:6Lbs
WARRANTY:None implied or expressed. Sold as is where is.