Low Profile Jack Trolley Hydraulic Car Truck Van SUV Garage Axle Jack Stand Tool

Description

Low Profile Trolley Jack Hydraulic Lift Heavy Duty Car Floor or Axle Stands Jack
2Ton Tonne Low Profile Trolley Jack Workshop Garage Hydraulic Floor Jack BLUE
Autofather Professional mechanics 2 ton hydraulic car jack is a durable product at a keen price.
Providing a lift height of 290mm, castors provide effortless manoeuvring and positioning.
FEATURES:
*High quality strong, sturdy 2 ton vehicle jack.
*140mm to 290mm height range
* Rear castors rotate for easy, control and manoeuvre ability.
* Built-in one piece hydraulic unit with pump-through action designed to prevent the handle locking at
* Maximum ram extension.
*Safety valve prevents overloading.
*Integrated carry handle
*Industrial hydraulic pump with relief valve
*High quality 2 ton trolley jack.
*Manufactured from heavy duty steel.
*Simple, design for ease of use and maintenance.
*Compact design.
*Ideal for lifting cars and light vans.
*Long, lasting and durable construction for a long service life.
Product Specifications:
* Maximum capacity: 2 ton
* Minimum height: 135mm
* Maximum height: 320mm
* Size: 450mm x 195mm x 135mm
* Product weight: 9.5kg
* Lifting: 2T
* Color: BLUE
* Material: Steel
Package Included:
*1 x 2 Ton Floor Jack
CARE AND MAINTENANCE:
· 1. When jack is not in use, lifting arm should be in full down position.
· 2. Always keep jack clean and keep the screw and bearings well lubricated.
· 3. Store the handle with care.
*USA Local Warehouse
*VAT SELLER
*LIFETIME MONEY BACK
*LIFETIME REPLACEMENT REFUND
*Free Replacement Guarantee
*Free Replacement
*Replacement Guarantee
*MONEY BACK Guarantee
*LIFETIME Warranty
*Clearance ! The Cheapest Price ! BIG SALE 50% OFF!
Set of 8 Flow Matched Bosch 0280150943 Fuel Injectors for Ford 4.6 5.0 5.4 5.8
Specification:
*Injector Design: Metal & composite plastic
*Orifice Type: 4 holes Disc
*Connector Type: EV1 Jetronic
*O-Ring: pre-installed
*Length: 3" (77mm)
*Distance between O-rings: 2 1/2 inches, 63 mm
*Filter Design: Basket filter design at inlet
*Spray Pattern: 15 Degree Spray Cone
*Diameter: 16mm
*O-Ring Diameter: 14.5mm
Compatible Vehicles:
For 93-94 Ford Bronco 5.0L/5.8L V8.
For 92-98 Ford Crown Victoria 4.6L V8.
For 93-94, 97-03 Ford E-150 Econoline 4.6L V8.
For 93-94, 97-98 Ford E-150 Econoline Club Wagon 4.6L/5.0L/5.4L/5.8L V8.
For 93-94, 97-03 Ford E-250 Econoline 5.0L/5.4L/5.8L V8.
For 93-94, 97-03 Ford E-350 Econoline 5.4L/5.8L/7.5L V8 V8, 6.8L V10.
For 93-94, 97-98 Ford E-350 Club Wagon 5.4L/5.8L /7.3L/7.5L V8 V8.
For 00-04 Ford Excursion 5.4L V8.
For 97-02 Ford Expedition 4.6L/5.4L V8.
For 93-94, 97-03 Ford F-150 4.6L/5.4L V8.
For 93-94, 97-99 Ford F-250 4.6L/5.0L/5.8L V8.
For 99-03 Ford F-250 Super Duty 5.4L V8.
For 93-94 Ford F-350.
For 99-03 Ford F-350 Super Duty 5.4L V8.
For 96-04 Ford Mustang 4.6L V8.
For 94-94 Ford Thunderbird.
For 98-01 Lincoln Navigator 5.4L V8.
For 91-93 Lincoln Town Car 4.6L V8.
For 94-94 Mercury Cougar.
For 92-97 Mercury Grand Marquis.
Package Includes:
8 pcs Fuel Injectors
Please read the following information carefully after purchase Please check if your model is suitable before buying
Precautions for replacement of fuel injectors:
1. The disassembly and assembly of the fuel injection nozzle must be in a certain order, and special tools are not allowed to be knocked and disassembled at will; the fuel injection nozzle should be placed in a clean place during maintenance and maintenance to prevent mechanical impurities from intruding.
2. Do not knock to avoid deformation, high-precision needle valve and nozzle should be placed in pairs, the editor reminds Ning, do not interchange and install wrong.
3. When assembling, it must be cleaned with oil, hands, site, and tools and containers. After all parts of the fuel injector are cleaned and dried, the assembly marks can be aligned before installation. The seat on the cylinder head can be installed before the assembly is installed. Wash the holes and dry them.
4. When installing, tighten the nut that compresses the injector housing with even and reliable force, and install the oil return pipe as required.
The maintenance of the fuel injector has the following main points:
1. It is necessary to ensure that the diesel fuel entering the fuel injection nozzle is clean, strictly use fuel that meets the specified standards, and must be filtered for more than 48 hours to reduce the wear of the needle valve assembly, prevent the nozzle hole from clogging, and avoid the needle valve from jamming or ablation Needle valve.
2. Check and adjust the fuel injection pressure and atomization quality in time to ensure the proper atomization cone angle and the correct fuel injection advance angle; clean up the carbon deposits in time and be careful not to damage the nozzle holes and the sealing surfaces.
3. After the carbon deposits are removed, the sealing cone can generally be grinded with engine oil or special abrasive paste, and then thoroughly cleaned, and then reinstalled and debugged. Here, the editor reminds you that the mating parts must be installed in pairs and not interchangeable.
4. During use, avoid overheating of the fuel injection nozzle and affect its normal operation. When the fuel injection nozzle is overheated, the needle valve of the fuel injection nozzle will malfunction, the nozzle hole and shaft needle will deposit carbon, and the needle valve will even be seized.
*USA Local Warehouse
*VAT SELLER
*LIFETIME MONEY BACK
*LIFETIME REPLACEMENT REFUND
*Free Replacement Guarantee
*Free Replacement
*Replacement Guarantee
*MONEY BACK Guarantee
*LIFETIME Warranty
*Clearance ! The Cheapest Price ! BIG SALE 50% OFF!
Emergency Wind Up Scissor Jack Lift for Car Van Garage W/ Speed Handle 2 Tonne
Description：
*The scissor jack, with tooth gears, can extend from 90mm(close position) to 360mm, more than enough to lift most vehicles.
*Easy to operate using the chromed crank with speed handle.
*Minimum height: about 90MM
*Maximum height: approximately 360MM
*Lifting: 2T
*Color: Black
*Material: Steel
*Net weight: 2.1KG
*Item Size: 35*8.5*8.5CM
*Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles.
WARNING
1. Study, understand and follow all instructions before operating this device.
2. Do not exceed rated capacity as designated by the height/capacity curve.(Sea below)
3. Use only on hard level surface.
4. Use for emergency tire changing only.
5. Never get beneath the vehicle when it is supported by the jack.
6. Activate the hazard warning flasher,turn off ignition, set parking brake, move automatic shift selector to park position. In case of a manual transmission, move gear selector into reverse position. In addition, the wheel diagonally opposite from the wheel being lifted shall be chocked in both directions.
7. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
8. Follow tire changing procedure as per the vehicle manufacturer's owner's manual.
9. No alterations shall be made to this product.
10. Failure to heed these messages may result in personal injury and/or property damage.
HEIGHT/CAPACITY CURVE
This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.
Before Use
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.
OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
CARE AND MAINTENANCE
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.
Package:
1 Set Tire Tool and 1 Scissor Jack