Jabsco Wireless Remote Control for Jabsco Searchlights and Spotlights - NEW

Description

Jabsco Wireless Remote Control for Jabsco Searchlights and Spotlights - 12 VDC - Model 60000-0000
Brand new in unopened packaging.
F R E E   S H I P P I N G
Adds wireless remote control to existing searchlight/spotlight installations
Pay
ment must be made within 3 days from close of auction
Free Ship to USA only.
The Jabsco 60000-0000/0024 Remote adds wireless control to new or existing Jabsco searchlight installations. It works in conjunction with a standard hard wired Jabsco panel mount controller, thereby adding a second controller for wireless remote operation of the searchlight at a distance of up to 100' (30 Meters). In applications where a panel mounted controller is not desired, the 60000-0000/0024 Wireless Remote Control System can be set up for wireless-only operation.
The Jabsco wireless receiver is installed inline between the searchlight and the hard wired panel controller. (see Fig. 1, 2). For installations where wireless-only operation is preferred, the receiver's (female) connector cable is connected to the searchlight cable. The receiver's (male) connector cable is not connected in this instance. In installations where the wireless remote will be used as a second controller, (in addition to the hard wired panel controller), the receiver's (male) connector cable is connected directly to the the back of the panel controller or to the wire pigtail coming from the back of the panel controller.
FEATURES
• Adds wireless control to existing searchlight installations for both console and remote control operation.
• Can be installed for wireless-only operation.
• 12/24 volt operation (60000-0000/60000-0024).
• True 8-way directional control with instant response for
precise targeting.
• “On/off” and “spot/flood” selection (for applicable models)
plus LED battery check.
• Long life lithium battery for hand-held remote control.
• Meets all applicable regulatory requirements for FCC,
Industry Canada, Australian and European compliance.
• “First-on” learning mode syncs transmitter and receiver
codes for no cross-talking with other remote control
devices.
• Up to four wireless remote units can be used per light
• Power saving "sleep mode" when not in use.
SPECIFICATIONS Transmitter: 3VDC (CR2032 Battery)
Reverse polarity protected
433.92MHz transmitting frequency Receiver: 12VDC 10 amp or 5 amp AGC Quick Blow Fuse Input power short circuit protection Range: 100 Ft. (30 Meters)