Electric Hydraulic Floor Jack Car Jack Lift 5T/3T 12V DC Electric Impact Wrench

Description

3T Scissor JACK
Features:
1.  High Stability and Safety: Heavy-duty steel construction, large base and saddle make this car jack strong and stable. Due to the safety compact design, jack will automatically stop working when it reaches the height limitation (43.5 cm/17.1inch).
2.  Designed for Sedan and SUV: Two removable raised heads are respectively designed for Sedan,SUV.
3.  Two-way Power Supply: It can be connected to either a 12 V outlet or car battery, two connector choices make it a necessary car repair tool when run into roadside emergencies.
4.  High Efficiency: It takes as short as 2 min to reach maximum height (43.5cm/17.1inch) with loading capacity as high as 3T(6600lb).
5.  Easy to Use at Night: The convenient build-in flash LED light enables operation at night or in the dimmed light without requirement of additional lighting tools.
Electric jack DC 12v 3 Ton is worth having for emergency roadside tire change and repair. The reinforced solid screw rod and high-strength steel body makes it strong and durable. Car jack scissor and flat tooth design, larger contact surface make it stable, two raised heads are suitable for city car or SUV. And it’s also anti-rust and wear resistant because of the whole anti-oxidation painting body. Battery clips with 12 V DC could be used to connect battery if car cigarette lighter is inoperative.
Parameter:
Rated power:100W
Operating Voltage:DC12V
Max.current:13A
Fuse:15A
Max.Loading Car Weight:3T(6600lb)
Lifting range:120-370/170-420mm
Power Cable :3.5M
Package:BMC with poly bag
Jack size:40*16*12cm
Weight:6.47/6.87KGS
Plastic box size:43.5*25*13.5 CM
Package include:
1*Electric jack
1*Plastic box
3*fuses
2*battery clamp connecting cable
1*power cable
1*instruction manual
1*Hand crank
1*jack high adapter
1*jack low adapter
5T Jack：
Product introduction
The 12V DC Automatic Electric Car Repair Tool Kit is worth having for emergency roadside tire change and repair. Cross groove saddle prevent slipping from vehicle. Rotating threaded rod can be spin out, makes cross groove saddle closer to lifting point. In case of the power has been disconnected, self-locking power structure and safety unloading knob prevent jack from falling and will not come down immediately. When re-connecting the power, jack will go on working in accordance with the instruction, or using the safety valve manually to fall. LED lamp on jack can be used as flashlight.
Description
1.  Work with 12V vehicle power outlet, 5.0T(11023lb) jack capacity.Super low pressure rod, set for the sports car.Double motor driver inside, work independently.
2.  Lift the car in less than a minute by the jack, change a tire quickly, perfect tire jack.Non-slip cross groove design. Freely adjustable height.
3.  The design of the jack is succinct and easy to operate with compact and organized storage box.New appearance design, It looks like a car. Enjoy yourself.
4.  Jack, pump and LED Flashlight can meet multiple demands.Matching with the relevant complete small tools, like safety hammer, gloves.With BMC packing, easy to carry.Engineering ABS shell to make it stronger.
5.  The structure is stable and secure. Machine will stop working when it lifts beyond the height limit.More widen aluminum plate to make it stable.More hidden heat dissipation mouth to prevent water splashing.
Parameter
Capacity (Load):1-5T
Max Height:450mm(14.2")
Min Height:135mm(5.3")
Rated power:150W
Operating Voltage:DC12V
Max.current:13A
Max.Loading Car Weight:5T
Lifting range:135-450mm(5.3"-14.2")
Power Cable:3.5m(137.8")
Jack size:31*15*14.5cm(12.2"*5.9"*5.7")
Jack weight: 4.7kg
Plastic box size:L36*W22*H18cm(14.2"*8.7"*7.1")
For Electric Inflator Pump:
Air Flow: 9.2 gal/min (35 L/min)
Max Pressure: 10 BAR/150 PSI
Hose Length: 25.6 in. (0.65m)
Current: 10A
Package include
1*electric hydraulic floor jack
1*safe hammer
1*plastic tool box
1*battery clamp connecting cable
2*gloves
1*power cable
2*fuses
2*instruction manual