Challenger / Charger / Magnum / HellCat / 300 Front Jack Pad 2008-2016 (FJP2)

Description

Lift Pad Pros
Front Jack Pads for all 2008 - 2016 Dodge Challenger, Charger, Magnum, HellCat, and 300.
These are the same as our 2017-2020 Dodge Hellcat and 2018 Dodge Demon pads but also include a frame insert nut as the earlier cars did not have the threaded hole in the frame.
These may also be used on the Demon's and HellCat's by using the oval hole in front of the threaded hole and will also move the pad forward a few inches.
These pads mount with a custom made insert nut into the factory oval hole in the front sub frame.
All Dodge cars come with rear factory jack pads but none on the front.
Helps stop people from putting jack under body and damaging floorplan (see last picture).
These Jack Pads make it much easier to verify your lift or jack location is under the frame and removes the need for wood blocks to clear the side sills when using a hoist.
Lift pads are made of Delrin (Polyoxymethylene) and only weigh 3 ounces each.
Each pad is ~1.150 inches tall and ~2.250 inches in diameter.
Kit comes with two Jack Pads, two Frame Insert Nuts, and two 8.8 hardened mounting bolts.