-40%

13dBi Helium Antenna Tuned US/AU 915mhz Directional panel McGill Microwave Miner

$ 131.36

Availability: 94 in stock
  • Brand: McGill Microwave Systems
  • Model: MM-ANT-FP-915-13DBI
  • Condition: New
  • Type: Antenna

    Description

    13 dBi Tuned Directional Antenna (US/AU 915)
    McGill Microwave Systems has launched it’s newest addition to our market leading Ultra High Performance Optimised and Tuned Lora Frequency Band Antenna series.
    Specially designed for use with Helium Hotspot miners , All Models (i.e Linxdot, Sensecap, Rak, bobcat, Nebra and all others)
    The unique 13 dBi Tuned Directional Antenna is both directional and has the additional significant advantage that it can be tilted or moved in the Azimuth direction – unlike all other Omni Directional Antennas.
    Omni directional Antennas radiate 360 degrees – this unique flat panel Antenna design is radically different in that it takes all of the radiated energy which usually would be transmitted behind and to the side of the Antenna and focuses all of this RF energy into the forward direction only – in one very wide and high beam – typically 68 degrees in Azimuth and Elevation.
    Typical applications:
    Where it’s desired to steer /direct the Radiated beam into a large or difficult to reach target area. This is achieved by utilising the unique feature of this Antenna design of being able to tilt or move in the Antenna utilising it’s tillable and rotatable Antenna Mount (supplied) to focus the large beam exactly in the direction required.
    Ideal for mounting on high up Balconies or Tower Blocks where Antennas are blocked from radiating in the rearwards direction.
    Installations located on the coast where transmission to the antenna rear is not required/desired.
    Installations located immediately in front of large hills or building where rear radiation is blocked and therefore not required.
    The flat panel sector Antenna is small ,lightweight and unobtrusive and white in Colour.
    Available in both EU 868 and US 915 Tuned and Optimised versions with ultra low VSWR.
    Antenna connector : N Female
    You will require an N Male connector on your LMR- cable
    Please check our shop for the correct LMR cable assembly you require
    13 dBi Tuned Directional Antenna Electrical Specifications
    Frequency Range (MHz)
    902 - 929
    Gain (dBi)
    13
    HPWH (Deg)
    65
    HPWV (Deg)
    18
    Tilt (Deg)
    0
    VSWR
    ≤1.5
    Impedance(Ω)
    50
    Connection Type
    N Female
    Max Input Power (W)
    50
    Lightning Protection
    DC Ground
    Mechanical Specifications
    Dimensions (mm)
    1120 x 280 x 80
    Colour
    White
    Radome MaterialUV
    UV Stabilised PVC
    Weight (KG)
    3
    Temperature Range ( C )
    -40 / +55
    Rated Wind Speed (km/h)
    126
    Click here for our complete Helium Antenna Collection
    Please check our shop for the correct LMR cable assembly you require or click our links below
    Use the table to help identify the correct connector for your hotspot (this is a guide only please check your miner)
    Helium miner type
    Required connector type to meet miner LoRaWAN interface
    Bobcat Bobcat 300
    RP SMA MALE
    RAKwireless/MNTD RAK V2
    RP SMA MALE
    NEBRA Indoor
    RP SMA MALE
    NEBRA Outdoor
    N MALE
    SyncroB.it EU
    RP SMA MALE (Check, early units had SMA Male)
    SyncroB.it US
    RP SMA MALE
    LongAP ONE
    SMA MALE
    LongAP Pro
    N MALE
    LongAP Light
    SMA MALE
    Original Helium (First 700 Hotspots)
    SMA MALE
    Sensecap M1
    RP SMA MALE
    Clodpi Pro hotspot
    SMA MALE
    Controllino
    SMA MALE
    FXTec Linxdot
    RP SMA MALE
    Heltec indoor hotspot
    RP SMA MALE
    Kerlink
    SMA MALE
    Dragino
    SMA MALE
    Pisces Outdoor
    N TYPE MALE
    COTX-X EU
    RP SMA MALE
    COTX-X US
    RP SMA MALE
    Browan Merryiot
    RP SMA MALE
    Milesight
    N MALE
    Panther X2
    RP SMA MALE
    *Note LMR-600 SMA connector struggles to mate with Syncrobit due to overhang of miner casing.
    Antenna designs combined with an excellent 35 +/- 5 degrees (6dBi) signal radiation footprint.
    Click here for our complete Helium Antenna Collection;
    For Antenna mounting Kits
    :
    Click here
    For LMR-400 NM- RP SMA Male Cable assembly
    :
    Click here
    For LMR-400 NM- SMA Male Cable assembly
    :
    Click here
    For Window Pass through cables
    :
    Click here
    The unique 13 dBi Tuned Directional Antenna is both directional and has the additional significant advantage that it can be tilted or moved in the Azimuth direction – unlike all other Omni Directional Antennas. Omni directional Antennas radiate 360 degrees – this unique flat panel Antenna design is radically different in that it takes all of the radiated energy which usually would be transmitted behind and to the side of the Antenna and focuses all of this RF energy into the forward direction only – in one very wide and high beam – typically 68 degrees in Azimuth and Elevation. Where it’s desired to steer /direct the Radiated beam into a large or difficult to reach target area. This is achieved by utilising the unique feature of this Antenna design of being able to tilt or move in the Ante
    The unique 13 dBi Tuned Directional Antenna is both directional and has the additional significant advantage that it can be tilted or moved in the Azimuth direction – unlike all other Omni Directional Antennas. Omni directional Antennas radiate 360 degrees – this unique flat panel Antenna design is radically different in that it takes all of the radiated energy which usually would be transmitted behind and to the side of the Antenna and focuses all of this RF energy into the forward direction only – in one very wide and high beam – typically 68 degrees in Azimuth and Elevation. Where it’s desired to steer /direct the Radiated beam into a large or difficult to reach target area. This is achieved by utilising the unique feature of this Antenna design of being able to tilt or move in the Ante